|
|
|
| The ATOM S530 BP CNC diecutting press is the fastest and most versatile cutting system for a wide range of materials. This machine was designed to accomodate both roll and sheeted goods. Material feeding is performed on a nylon transport cutting belt (shore D 92) and the belt is moved by highly accurate clamps. Accurate cutting can be achieved (+/-0.1MM) through ATOM's nesting software. Maximum cutting forces of 25 US tons with material widths up to 2000MM. This machine is also available in the BP/OL version with automatic off-loading of cut parts. The optimal solution for high production and material savings. Technical Information and More |
|
|
 |
|
| The ATOM S530BR diecutting machine is also equipped with a nylon cutting belt but the material is transported by nip rolls rather than clamps. This is the ideal system for companies utilizing roll goods. With up to 100 strokes per minute and ATOM's nesting software, this system can easily replace up to 5-7 manual traveling head presses and save companies up to 35% in material. Twenty-five tons of cutting power, head sizes uo to 500x500MM with bed sizes up to 1600MM in width. Technical Information and More |
|
|
 |
|
| The ATOM S530T/OL CNC die cutting press is the ideal system for cutting sheeted material only. Cutting is performed on a high quality phenolic tray with a HYDROMA polypropelene cutting pad on top. The sheets can be stacked in multiple layers and do not require stapling thanks to the special clamps deisgned to automatically lock the material in place when the cutting cycle begins. In addition, this syetms is equipped with an automatic off-loading device for cut parts onto a lateral conveyor attached to the machine. Equipped with the same sophisitcated ATOM nesting software employed in all CNC cutting systems providing companies high material yields and savings. Technical Information and More |
|
|
 |
|
| The ATOM S740V2 CNC die cutting system is the most advanced cutting system available in today's market. This machine is suitable for both sheets and rolled goods. The automatic sheet loading device is equipped on the back of the machine to load materials with a vacuum suction system. In addition, this system is equipped with a conveyor on the side of the machine for the off-loading of cut parts. Once the sheets are loaded onto the machine, the highly accurate transport cutting belt and clamping system move the material to the proper position. This machine has a touch screen with a modem link for on-line diagnostics and fault finding. Belt width's up to 2030MM and head sizes up to 700x700MM with 40 tons of cutting force in continuous service. Techniacl Inofrmation and More |
|
|
 |
|
|
|
|
|
|
|
