| ATOM Full Head Beam die cutting presses, BPE Series is equipped with a nylon transport cutting belt and mobile clamping system which work as a material conveyor. The belt is used as a cutting surface and the positive head stops guarantee precise cutting depths. This series is the logical machine for companies utilzing rolls and sheeted goods using large cutting dies requiring high cutting powers. With up to 23 strokes per minute and highly accurate positioning this is the system for ideal solution for maximum performance and flexibility. Available in 77-110-165 US tons. Technical Info and More |
|
|
 |
|
| The ATOM Double Tray (DT) Full Beam Cutting Press was designed for companies converting sheeted goods only. The dual tray allows for high production, basically employing two machines in one. There are two independent controls for pressure setting: stroke end which works off a microswitch and pressure mode which works off a pressure switch. Different height dies can be used when the machine is set up in the pressure mode. Available in 77-110-165 US tons. Technical Information and More |
|
|
 |
|
| The ATOM Receding Head Cutting Press was designed for companies needing high visibility for cutting die positioning. The head recedess at a speed of 534MM/Sec. making this the fastest press of it's kind. This machine can also be equipped with a nip roll feeder for materials in rolls. Available in 77 US tons only. Techniacl Information and More |
|
|
 |
|
| The ATOM Single Tray Beam Cutting Press is equipped with a manual sliding tray for companies utilizing sheeted goods. The die can be fixed to the machine's head or can be placed on the sliding tray depending on the material. In addition, these machines have been built with extended sliding trays for companies cutting large truck liners or matresses needing large cutting areas at a very economical price. Equipped with the same settings as the DT version; stroke end and pressure mode for maximum versatility. Availbe in 77-110-165 US tons. Technical Information and More. |
|
|
 |
|
| The ATOM 300 Series of Beam Cutting Presses can be set up as a manual, semi-automatic or fully automatic system. This series can be equipped with a programmable nip roll feed system when set up as an automatic machine. The operator simply enters the die depth, configures the gap and hits go, the machine automatically begins feeding and cutting with speeds up to 20 strokes per minute. Manual machines can also utilize the nip roll feeder but the operator must step on the pedal to commense feeding and then hit the two button switch to engage cutting. This series is available in 77 & 110 US tons. Technical Information and More. |
|
|
 |
|
| The ATOM HTCE Series of Full Beam Cutting Presses was designed for companies utilizing very large dies or groups of dies requiring large cutting areas and high cutting powers. The powered incremental tray transports the dies and material into the machine making one, two and three cuts simultaneously. The system is available in 77-110-165 US tons. Technical Information and More. |
|
|
 |
|
|
|
|
|
|
|
|
